Pool Filter Backwashing
No, you must thoroughly clean the elements at least once a year. You can clean your filter elements using automatic dishwasher detergent. Remove the elements from the filter, according to the instructions in your Owner's Guide, and hose them off with a forceful stream of water from your garden hose. Fill a large plastic container with the detergent, using about a 1/2 cup and warm water. Soak the elements for approximately 3 - 4 hours. After soaking, rinse off the elements again. Re-assemble your filter according to the instructions in your Owner's Guide.
Note: do not soak elements in muriatic if the pool uses Biguanide products. This will damage the filter.
You may choose to clean the elements with muriatic acid or other commercial filter element cleaners, mix according to the package instructions. Use extreme caution when handling any cleaning agents, as they can be harmful to the eyes, skin and clothing. After cleaning, thoroughly rinse all elements with cold water.
S.Merillat(r)
Visit http://www.1800pools to learn more about Pool Filter Care.
About the Author: Steve Merillat has been in the Pool industry for 35 years. He started early on working for various Swimming Pool supply companies before ventured out in his own business. He pioneered many processes with the installation of pools that are used as industry standards today. He regularly holds seminars and classes on how to properly maintain your Swimming Pool. Visit http://www.1800pools.com
More articles by one800pools
Print Article | Download PDF | 18 views | Sep 02 2008
|
